Ergotron LX Desk Dual Direct Arm - White - with Low-Profile Clamp (25–35 mm surface)
Mfr # 45-627-216
*Terms & Conditions = Pricing and availability are subject to change. No returns or refunds for Ergotron products.*
Experience ultimate flexibility and comfort with the LX Desk Dual Direct Arm. The low-profile monitor crossbar allows for precise screen positioning without sacrificing desk space. Easily fold away when not in use.
• Comfortable fit
Moves two monitors in one easy motion
• Dual purpose
Supports two screens up to 25" in size
• Maximize space
Adjusts monitors in a compact range of motion
• More workspace
Free up your desktop for office essentials
• Sleek build
Streamlined look enhances your work area
• Quality design
Built for years of use by passing our 10,000-cycle motion test
Main Features
Part Number: 45-627-216
Product Weight: 11.9 lbs
Shipping Weight: 16.8 lbs
Description: LX Dual Direct Arm with Low-Profile Top-Mount C-Clamp (25 to 35 mm)
• Includes LX Arm, extension, base, low-profile clamp, dual bow, two monitor pivots, 7" pole, attachment hardware
• Handle available as an accessory
• Maximum outside width of display is 25.1" (63.8 cm) when displays are 1.8" (4.8 cm) thick; 24.8" (63 cm) wide when monitor is 2.6" (6.6 cm) thick. Accommodates most displays with screen–size up to 25" as well as some displays with screens as large as 27". Actual allowable width of displays will vary slightly depending on display thickness
Weight Capacity: Maximum individual LCD weight = 2–11 lbs (.9–5 kg) per monitor. Total weight capacity = 4–22 lbs (1.8–9.9 kg). Monitor depth greater than 3" (7.5 cm) may diminish capacity
• 13" (33 cm) vertical height adjustment with total monitor weight less than 17 lbs (7.7 kg). If total monitor weight greater than 17 lbs (7.7 kg), the vertical range of motion may be reduced up to 4.5" (11 cm) for a total height range of 8.5" (22 cm)
Tilt Range: 13° backward, 17° forward. Each monitor tilts individually
• Arm extends out up to 24.3" (61.7 cm) extended reach
Mounting Standards: VESA FDMI MIS–D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
• Low-profile clamp attaches to surface edge 25 to 35 mm (0.98" to 1.37") thick
• Accessory clamps are available for other worksurface thicknesses: 98-477-224 and 45-477-216 for surface edge 12 to 18 mm thick; 98-478-224 and 45-478-216 for surface edge 18 to 25 mm thick
Note: This arm cannot be retrofitted with a Grommet Mount or 2-Piece Clamp
• Requires open space of 0.8" (2 cm) behind surface for installation
• Streamline cable management that routes cables under arm and within extension
• Portrait/landscape rotation with lockout
Shipping Dimensions: 30.6" x 12.2" x 7.6" (78 x 31 x 19 cm)
Warranty: Ten years
