HPE Aruba 6300M 24-Port SFP+ and 4-Port SFP56 Switch
Mfr # JL658AR
This is not your typical 3rd party refurbished item, this has been recertified & processed by HPE to pass the same testing procedures as new products and includes a direct HPE Warranty (same as new) at considerable savings.
The Aruba CX 6300 Switch Series is a modern, flexible, and intelligent family of AOS-CX stackable switches ideal for enterprise access and aggregation. With a cloud-centric design that combines a fully programmable OS with the Aruba Network Analytics Engine, the Aruba CX 6300 extends industry-leading monitoring and troubleshooting capabilities to the access layer. Support of Aruba NetEdit and the Aruba CX Mobile App verify that configurations are flawless and easy to deploy. A powerful Aruba Gen7 ASIC architecture delivers fast, non-blocking performance, meaning your network is ready for tomorrow’s unpredictable demands. Aruba Virtual Stacking Framework (VSF) allows for stacking of up to 10 switches, providing scale and simplified management. This flexible series has built-in wirespeed 1/10/25/50GbE uplinks and supports high density IEEE 802.3bt high power PoE with HPE Smart Rate multi-gigabit Ethernet for high speed APs and IoT devices using existing cabling.
• Ports: 24x 1G/10G SFP+,4x 1/10/25/50G SFP
• Processor: Quad Core ARM Cortex A72
• Power Consumption: 85W
• Throughput: 654Mpps
• Memory: 32GB eMMC
Main Features
Manufacturer: Aruba
Brand: Aruba
Product Line: HPE Aruba
Model: 6300M
Packaged Quantity: 1
Chassis
Airflow Direction: Front and side to back
Processor
Type: Cortex-A72
Installed Qty: 1
Manufacturer: ARM
Clock Speed: 1.78 GHZ
RAM
Technology: DDR4 SDRAM
Installed Size: 8 GB
Flash Memory
Installed Size: 32 GB, 32 GB
Performance
Performance: Latency (1 Gbps): 1.99 µs, Latency (10 Gbps): 1.49 µs, Latency (25 Gbps): 2.85 µs, Latency (50 Gbps): 2.82 µs, Stacking bandwidth: 200 Gbps, Switching capacity: 880 Gbps, Throughput: 654 Mpps
Capacity
Capacity: IGMP groups: 8000, IPv4 ACL entries (egress): 2000, IPv4 ACL entries (ingress): 5000, IPv4 host table capacity: 32000, IPv4 routes (Multicast): 8000, IPv4 routes (Unicast): 64000, IPv6 ACL entries (egress): 500, IPv6 ACL entries (ingress): 1250, IPv6 host table capacity: 32000, IPv6 routes (Multicast): 8000, IPv6 routes (Unicast): 32000, MAC ACL entries (egress): 2000, MAC ACL entries (ingress): 5000, MLD groups: 4000, Switched virtual interfaces (SVIs): 1000
Networking
Type: Switch
Subtype: 10 Gigabit Ethernet
Form Factor: Rack-mountable
Stackable: Stackable
Ports Qty: 24
Advanced Switching: Layer 3
Routing Protocol: BGP-4, Bidirectional Forwarding Detection (BFD), ECMP, EGP, IGMP, IGMPv2, IGMPv3, MLD, MSDP, OSPFv2, OSPFv3, Static IPv6 routing, VRRP
MAC Address Table Size: 32000 entries
Jumbo Frame Support: 9198 bytes
Manageable: Yes
Remote Management Protocol: CLI, HTTPS, RMON, SFTP, SNMP 2c, SNMP 3, SSH, Telnet, TFTP, XRMON
Features :Access Control List (ACL) support, ARP support, Aruba Virtual Switching Framework (VSF), Auto-uplink (auto MDI/MDI-X), Bridge protocol data unit (BPDU), Broadcast storm protection, Class of Service (CoS), Deficit Weighted Round Robin (DWRR), DHCP protection, DHCP support, Dual firmware images, Dynamic IPv6 lockdown, Front to side airflow, High Availability, IGMP snooping, IP multicast, IPv4 and IPv6 dual stack, Jumbo Frames support, LLDP support, Management Information Base (MIB), Microsoft Network Load Balancer (NLB), MLD snooping, Multicast Storm Protection, Multiple Spanning Tree Protocol (MSTP) support, Multiple VLAN Registration Protocol (MVRP), ND snooping, Network Timing Protocol (NTP), Packet storm protection, Per-VLAN Spanning Tree (PVST), Protocol Independent Multicast (PIM), Quality of Service (QoS), RA guard, Rapid Per-VLAN Spanning Tree Plus (PVRST+), Rapid Reconfiguration of Spanning Tree (RSTP), Strict Priority (SP), Syslog support, Type of Service (ToS), Unicast Storm protection, Uni-Directional Link Detection (UDLD), Virtual Extensible LAN (VXLAN), VLAN support, VLAN Tagging, Zero-touch provisioning (ZTP)
Compliant Standards :IEEE 802.1ab (LLDP), IEEE 802.1ak, IEEE 802.1AX, IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1t, IEEE 802.1v, IEEE 802.1w, IEEE 802.1x, IEEE 802.3ad (LACP), IEEE 802.3ae
Ports
Qty: 24
Ports (2nd)
Qty: 4
Type: 1 Gigabit / 10 Gigabit / 25 Gigabit / 50 Gigabit SFP56 (uplink / stacking)
Interface Provided
Interfaces: 1 x management, 1 x USB Type A, 1 x USB-C console, 24 x Gigabit / 10Gbit LAN SFP+, 4 x 1Gbit/10Gbit/25Gbit/50Gbit SFP56
Miscellaneous
Color Category: Black
Rack Mounting Kit: Included
Height (Rack Units): 1
Authentication Method: RADIUS, Secure Shell (SSH), TACACS+
Compliant Standards :CAN/CSA C22.2 No. 60950-1-07, CISPR 22 Class A, CISPR 24:2010, CISPR 32 Class A, CISPR 35, EN 50581:2012, EN 55022:2010, EN 55024:2010 Class A, EN 55032:2012 Class A, EN 55035:2017, EN 60825-1:2007, EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013, EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013, EN 61000-3-2, EN 61000-3-2:2014, EN 61000-3-3, EN 61000-3-3:2013, FCC Class A certified, FCC Part 15, ICES-003 Class A, IEC 60825-1:2007 Class 1, IEC 60950-1:2005, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-11, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, RoHS, UL/CSA60950-1 (2nd Edition), VCCI Class A, WEEE
Dimensions & Weight
Width: 17.4 inch
Depth: 15.2 inch
Height: 1.7 inch
Weight: 12.79 lbs
Environmental Parameters
Min Operating Temperature: 32 degree Fahrenheit
Max Operating Temperature: 113 degree Fahrenheit
Min Storage Temperature: -40 degree Fahrenheit
Max Storage Temperature: 158 degree Fahrenheit
Humidity Range Operating: 15 - 95% (non-condensing)
Humidity Range Storage: 15 - 95% (non-condensing)
The HPE Renew Program offers you a comprehensive portfolio of thoroughly remanufactured HPE products that are a mirror image of new, at very competitive prices. HPE warranty is assured as all HPE Renew products undergo the same building and testing process as for new products. If you're looking for refurbished or reconditioned technology, consider fully remanufactured products from HPE Renew, a better option since they perform as new and have the same warranty as New, the warranty will begin when the customer receives the product.
HPE Renew Program includes any of the following
• Demonstration and trial equipment
• Lease and rental returns
• Discontinued products
• Excessive inventory from factory
• Customer returns Trade-in and trade-up programs
Rackfinity is an Authorized HPE Business Partner, please contact us for additional HPE Renew solutions that can be customized to fit your requirements.
