Tripp Lite UPS Smart 1500VA 1350W Rackmount AVR 120V Pure Sine Wave USB DB9 SNMP 2URM

Tripp Lite UPS Smart 1500VA 1350W Rackmount AVR 120V Pure Sine Wave USB DB9 SNMP 2URM - 2U - 4 Hour Recharge - 4.50 Minute Stand-by - 110 V AC Input - 120 V AC Output - 8 x NEMA 5-15R

Mfr # SMART1500RM2U

The SMART1500RM2U SmartPro 120V 1.5kVA 1.35kW Line-Interactive Sine Wave UPS provides battery backup and AC power protection against blackouts, brownouts, power surges and line noise that can damage electronics or destroy data. Ideal for backing up servers and network storage devices, the SMART1500RM2U switches to battery mode in milliseconds to keep your connected equipment running long enough to save files and shut down safely with no data loss.

Featuring eight NEMA 5-15R outlets (four switchable) and a 10-foot power cord with 120V NEMA 5-15P input, the SMART1500RM2U has an internal battery that provides 13 minutes of support at half load and 4.5 minutes at full load. A front-panel LCD screen lets you monitor important data, such as load level, voltage, battery charge and estimated runtimes.

Automatic voltage regulation (AVR) maintains 120V nominal output over an input range of 83V to 147V without using battery power. EMI/RFI noise filtering improves your equipment's performance and prevents damage. A 570-joule surge suppression rating protects your equipment from harmful power surges. With Tripp Lite's PowerAlert® software (available via free download), the SMART1500RM2U enables safe unattended system shutdown and file saves in case of a prolonged power failure.

Main Features
Manufacturer: Tripp Lite
Manufacturer Part Number: SMART1500RM2U
Manufacturer Website Address: www.tripplite.com
Brand Name: Tripp Lite
Product Line: SmartPro
Product Name: SmartPro 1500RM2U UPS
Packaged Quantity: 1 Each
Product Type: Line-interactive UPS

Technical Information
Plug/Connector Type: NEMA 5-15P
Receptacles: 8 x NEMA 5-15R
Emergency Power OFF: Yes
Cord Length: 10 ft

Power Description
Load Capacity: 1500 VA/1350 W
Input Voltage: 110 V AC
Output Voltage: 120 V AC
Waveform Type: Sine Wave

Management
Network Management: SNMP Manageable
Alarm: Low Battery
Alarm: On Battery
Alarm: Overload
Controls/Indicators
Status Indicators: 5 front panel LEDs - Green POWER LED, 3 color BATTERY CHARGE LED, 3 color OUTPUT LOAD LEVEL LED, red BATTERY WARNING LED.

Interfaces/Ports
USB: Yes
Total Number of Expansion Slots: 1

Battery Information
Battery Chemistry: Sealed Lead Acid (SLA)
Backup/Run Time (Full Load): 4.50 Minute
Backup/Run Time (Half Load): 13 Minute
Battery Life: 6 Year
Typical Battery Recharge Time: 4 Hour
Hot Swappable: Yes

Environmental Conditions
Maximum Operating Temperature: 104°F (40°C)

Physical Characteristics
Height: 3.5"
Width: 17.5"
Depth: 13.5"
Rack Height: 2U
Weight (Approximate): 46 lb

Miscellaneous
Package Contents:
• SmartPro 1500RM2U UPS
• Mounting hardware for 4 post rackmount installation
• Cabling for USB & DB9 monitoring and EPO switching
• PowerAlert unattended shutdown and UPS/Power monitoring software
• Warranty information
Additional Information:
• SMART1500RM2U line-interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts and overvoltages, plus network grade AC surge suppression
• 1500VA / 1350 watt power handling ability and full time sine wave output offers guaranteed compatibility with properly sized networking, telecom and other sensitive electronic devices
• Supports 2U rackmount installation in 4 post rack enclosures with included mounting accessories, 2 post mountable with optional 2POSTRMKIT accessory, upright tower installation supported with optional
• 2-9USTAND accessory
• Large internal batteries offer runtimes of 25 minutes at half load (750VA / 500 watts) and 10 minutes at full load (1500VA / 1350 watts)
• Maintains regulated 120V nominal output during brownouts and overvoltages from 83 to 147V
• Includes 8 UPS-supported outlets arranged in 2 individually controllable load banks (2 outlets per bank)
• PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user-defined script commands
• Offers simultaneous monitoring by up to 3 directly-connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additoinal UPS systems over IP with included PowerAlert monitoring software. Free PowerAlert enterprise management software is also available for select opportunities
• Communications ports support messaging of UPS and line power status, including on battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity
• Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for scheduled or immediate reboot of connected devices
• Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW)
• Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter
• Emergency Power Off (EPO) interface with cable
• Multi-function audible alarms and set of 5 front panel LEDs
• Network-grade AC surge suppression
• Attractive all-black color scheme
• UPS battery set ships fully assembled and ready for installation, no time consuming connection of internal batteries by user is necessary
• This unit has an LCD screen
• Two year warranty with $250,000 connected equipment insurance (USA & Canada only)
Certifications & Standards: UL1778 (USA), cUL (Canada), FCC Class A (emissions), NOM (Mexico), Conforms to IEEE 587 / ANSI C62.41 specifications
Recycled: No
Country of Origin: China

Warranty
Limited Warranty: 2 Year